Quote:
Originally Posted by Grumpy old man
I'll take the front 1/2 for $50.00 + shipping . No bondo , No pin holes 
If you can cut the cup off 1"- 2" above the body line . I don't need the rest of it and I really don't want to pay to ship the whole thing when all I need is the cup .
Pm sent . |
I sanded off the paint to verify no filler and no pinholes. I tried scotchbrite first, the pads kept gumming up. I used a 36 grit pad VERY LIGHTLY to get the second layer off, then used an 80 grit pad on a D/A sander. I apologize but some of the 36 grit marks went deeper than I wanted, I’m confident they will fill in easy. There are two very small dents on the bottom, one about the size of a quarter, the other about 1.5 quarters. There is some surface rust inside the cup area that will clean up. I took pictures of the scratches, again I apologize for that. If your good with that, it will fit into a large flat rate box.