|
Re: Collapsible intermediate shaft?
Quote:
Originally Posted by Afirehawk1
so has anyone used a power steering gear box from late 70's (1977) C10?
the way i read the specs o the input shaft from MasterPro, there are 25 or 26 spline per their website. assuming that is not counting the flat spot on the shaft.
Wanting to order the CSS-1DD730 by CPP which is the 3/4-30 spline.
just want to verify this.
|
Count the splines on the gear you have and order the steering joint of your choice to match the gearbox. If you're running the stock style rag joint, they all use the same intermediate shaft bolt spacing
__________________
Christian Carpenter
1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit
1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed
1995 Dodge Dakota Sport
"I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson
|