The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 02-01-2021, 12:01 AM

Well you be better off doing as I. Buy a Nissan rear view mirror with Home link and temperature & compass. I'm working on them now for my 71 C-10 and the 64 SS Impala to work with factory mounts. I have the one in my 71 now but it's mounted on the windshield. I waiting on a couple of parts I ordered to try. If it works out I plan to redo the 71 with the factory mount.

My ramp truck I ran the 3 Home link switch up to the drivers side visor under the windshield gasket. I have it mounted into the visor. The visor wasn't in that good of shape so I went for it.If you look close in the last picture you can see it on the visor.

02-01-2021, 12:01 AM	#2
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: 12V to 1967 sunvisor Well you be better off doing as I. Buy a Nissan rear view mirror with Home link and temperature & compass. I'm working on them now for my 71 C-10 and the 64 SS Impala to work with factory mounts. I have the one in my 71 now but it's mounted on the windshield. I waiting on a couple of parts I ordered to try. If it works out I plan to redo the 71 with the factory mount. My ramp truck I ran the 3 Home link switch up to the drivers side visor under the windshield gasket. I have it mounted into the visor. The visor wasn't in that good of shape so I went for it.If you look close in the last picture you can see it on the visor. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.