|
Re: How to fix door dented from hitting fender
A picture may help the body experts. A stud MAY pull the dent out, but you will have to evaluate the overall shape of the door panel after straightening. You don’t want the panel to be flimsy after repairing (called oil canning). You may need to use a porta Power, or a small hydraulic jack and a 2X4 in side the door, to push from front to back to put to door body closer to how it was originally. You can obviously tell a little dent or crease really screws up a nice piece of sheet metal. You have a couple of doors that need this done to them, a similar mistake....
|