|
Re: WTB Clutch Linkage & Door Latch Parts
Quote:
Originally Posted by Riverstory
I have a clutch linkage rod with minor wear if you want it - cost me nothing. But . . .
I cut my existing rod, threaded the rod and then added Heim joints. I eliminated the friction of metal on metal.
And on the clutch part that egg shaped, I welded it and re-drilled the hole.
|
Thank you for your generosity. Dwayne has one as well that I don't have to have shipped, so I'll be getting it this weekend.
I did see that mod, but unfortunately for me, I don't have a tap and die set yet and my welder is back home in Woodstock while I'm in Milledgeville till the end of April. Before I install the new to me parts, I'm going to look into using either a nylon or bronze bushing to take up any slack keep it from wearing through again
__________________
Christian Carpenter
1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit
1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed
1995 Dodge Dakota Sport
"I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson
|