|
Re: No start after working on power windows
I was going to jumper wire the clutch switch when I found the questionable fusible link.
I don't like the harness connector I got from LMC. The connector does not fit flush against the back of the switch and I did see some arcing between the contacts when I first installed it, but the switch did work. I think that may have contributed to the fusible link damage. I am going to fit a piece of tool tray liner in between the connector and switch to fill the gap. If that does not work I will have to buy a Delco harness/connector. I installed one on the other door with no fitment issues, but the wires are not color coded like the LMC connector.
|