The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

kaycee · 05-04-2021, 08:45 AM

So I read where the towers are different for the 63-66 SBC unless they are the 6cyl. mount. I had a set that were in my 63 and they were welded to the frame not using any of the holes. So I swapped a set in from the 67-72 era and they mount t upper frame rail but the bottom hole is sitting half off the crossmember. Was there a different mount used in the 63-66 range ?

05-04-2021, 08:45 AM	#1
kaycee Registered User Join Date: Jan 2000 Location: Wyoming USA Posts: 2,464	Sbc engine towers So I read where the towers are different for the 63-66 SBC unless they are the 6cyl. mount. I had a set that were in my 63 and they were welded to the frame not using any of the holes. So I swapped a set in from the 67-72 era and they mount t upper frame rail but the bottom hole is sitting half off the crossmember. Was there a different mount used in the 63-66 range ? __________________ 2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327/4L60