|
Sorry man,I did screw you up a bit.
Forget what I said about the Blue and White wires.
If you just want to get the CS alt. running for now do this.
Larger red wire-connect to the power output post on the "CS alt.
Connect the brown wire from your factory harness to the "L" terminal-brown/red wire.
Because you have the gauge make sure there is a 35ohm resistor installed in the brown wire circuit.That ciruit needs the 35ohm resistance to start energizing the alt.
__________________
71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension.
Petrolia,Ontario,Canada but working in Port Huron,MI.
See ALL my Blazer pic's HERE
|