Quote:
|
Originally Posted by BobbyK
Sorry man,I did screw you up a bit.
Forget what I said about the Blue and White wires.
If you just want to get the CS alt. running for now do this.
Larger red wire-connect to the power output post on the "CS alt.
Connect the brown wire from your factory harness to the "L" terminal-brown/red wire.
Because you have the gauge make sure there is a 35ohm resistor installed in the brown wire circuit.That ciruit needs the 35ohm resistance to start energizing the alt.
|
Bobby--thanks
I thought so....
By the way the link I posted mentions something about the "F" terminal having a resistor...not sure I am brave enough to try at this point.
