|
Re: Hard Starting Hot
Quote:
Originally Posted by Rich72C10
I don't know if they did the brass inserts or not.
I put the throttle half way and I can move the throttle side to side. Not sure if that is what you mean but I can move it laterally. When I pull the throttle out from the body, I can get almost a penny wedged in.
Yes, she was full warmed up real good.
What do you mean by QC ... to me that means quality control.
|
The throttle shaft should have absolutely zero 'play' side-side (tangent to the shaft) and almost zero play along the axis of the shaft. Take the throttle spring off so you can freely move the throttle.
Quadrajet parts sells a special stepped drill and the bushings: https://quadrajetparts.com/carbureto...uad-p-886.html
Available in 3/8" and 5/16" This is the tool I used to fix my worn out carb.
__________________
1971 SWB step side: Original NM Forestry truck, then NM Fire truck, and now a ranch truck.
Last edited by Carl Spangler; 05-23-2021 at 04:17 PM.
|