The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - How to install hood to cowl rubber seal for 1968 Chevy C10

truckster · 05-23-2021, 09:13 PM

It just goes under the front lip of the cowl. Remove the cowl screws, remove any remaining rubber from the original seal, put in the new seal, line up the holes, and put the screws back in. You might need to loosen the cowl bolts on the ends of the cowl, but you shouldn't need to remove them.

05-23-2021, 09:13 PM	#2
truckster Registered User Join Date: Jan 2001 Location: Orem, Utah Posts: 8,266	Re: How to install hood to cowl rubber seal for 1968 Chevy C10 It just goes under the front lip of the cowl. Remove the cowl screws, remove any remaining rubber from the original seal, put in the new seal, line up the holes, and put the screws back in. You might need to loosen the cowl bolts on the ends of the cowl, but you shouldn't need to remove them. __________________ I have sworn upon the altar of God, eternal hostility against every form of tyranny over the mind of man. - Thomas Jefferson 1972 K/5 Blazer CST 4WD 1963 Corvair Monza Spyder Turbo convertible 1995 Camaro Z/28