Oh Boy have I spent a lot of time looking at pictures of rear shocks over the past day and, I am no further forward.
So here is the dilemma. I have a NoLimits Panhard bar kit that requires the removal of the old mount and installation of the new with a number of bolts.
You can sort of see what I mean here.
I am also mounting my shocks outside of the chassis - pretty obvious if you look at the above.
The problem I am facing is that the bolts holding the mount on interfere with the shock. If I turn them around so the nuts are on the inside they then interfere with the Panhard bar.
My question is this.
How far back can the shocks be leant before they become ineffective OR... Have I made a complete hash of this and done too all wrong?
Any advice, comments and roasting gladly received.
Thanks!
P.
