The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Jason Banks** · 06-21-2021, 08:31 PM

I used these to attach to the tubing:
https://www.summitracing.com/parts/sum-2200075b
https://www.summitracing.com/parts/sum-2200077b

Using the above will not require a 37° flaring tool, which is not common.

I bought a flaring tool for some reason, thinking I was going to use the tube nut/sleeve combo like these:
https://www.summitracing.com/parts/sum-220633-2b
https://www.summitracing.com/parts/sum-220634-2b

With the tube nut and sleeve, you put the nut then sleeve on the tube and flare the tubing and you can then connect to a male AN fitting.

06-21-2021, 08:31 PM	#8
Jason Banks Senior Member Join Date: Dec 1999 Location: TX Posts: 1,691	Re: 69 Fuel Lines I used these to attach to the tubing: https://www.summitracing.com/parts/sum-2200075b https://www.summitracing.com/parts/sum-2200077b Using the above will not require a 37° flaring tool, which is not common. I bought a flaring tool for some reason, thinking I was going to use the tube nut/sleeve combo like these: https://www.summitracing.com/parts/sum-220633-2b https://www.summitracing.com/parts/sum-220634-2b With the tube nut and sleeve, you put the nut then sleeve on the tube and flare the tubing and you can then connect to a male AN fitting.