|
Re: Alternator
I wanted to clean my engine bay up and didn't like the old wiring harness hanging across my motor since I moved my alternator so I just eliminated the old harness and made my own.
I ran my hot wire to a junction block I placed on the firewall and from there to the hot post on my starter. I ran the control wire ( or whatever it's called) to the brown wire on the plug on my firewall. I then looped the sensor wire to the hot wire on back of the alternator. I was planning to move the sensor wire to the hot block on the firewall but never did it. Been running it this way for five years so don't see any reason to change it now.
|