|
Re: How good are the repop fenders?
I used repop on my truck and they required some tweaking. As mentioned, the seam on the front edge of them was sub-par as far as the gap being consistent. I welded that seam up on mine anyways...so, no real harm. The worst part was the lower aft mount on mine. When bolted up it was probably 1/2" inset from the door leading edge. I cut the lower portion of that brace and basically "gapped" it accordingly to get it to sit flush with the door skin. Hope that last sentence makes sense. If I had to do it over again, I would just buy the rear repair section and weld in as needed.
|