The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Man, I broke off an "EZ-Out" inside ...

grayw0lf · 07-18-2004, 10:48 AM

It shouldn't be too hard to find a new prop valve on here. You can probably get tone pretty cheap. I wasn't planning on selling it, but if you need one for a drum/drum setup, I have a good one in the garage attic.

You can either use a double flare tool & put a new fitting on it. Or, you can buy a short piece w/ the flare already on it & use a joining compression fitting on the other side.

07-18-2004, 10:48 AM	#2
grayw0lf Registered User Join Date: Apr 2004 Location: Clanton, AL Posts: 1,253	It shouldn't be too hard to find a new prop valve on here. You can probably get tone pretty cheap. I wasn't planning on selling it, but if you need one for a drum/drum setup, I have a good one in the garage attic. You can either use a double flare tool & put a new fitting on it. Or, you can buy a short piece w/ the flare already on it & use a joining compression fitting on the other side. __________________ 85' CUCV M1009!!! The newest addition! 6.2diesel, Th400, NP208, & only 36k miles! 70' C-10 LWB Fleetside - Looking good these days! 05' Dodge Neon 88' Winner Escape Sport 1750 - 4.3v6 94' Seadoo SP 84' Honda TRX200, bare nekkid. Just a frame & tires. Always looking for another project or any good deal!