The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - My 67 C10 Step Side project (long time comin)

Two Stall · 09-29-2021, 01:55 PM

I'm new to this blog site and I'm building a 1967 Chevy C10 Step Side. I just working on the frame now with the typical upgrades. I'm boxing in the frame, adding new CPP trans. and rear trailing arm crossmembers and Helix Mustang II IFS. I am looking for a proper Rack and pinion system now and building my own trailing arms with the help of a friend of mine who is a professional welder. The frame stance is 4 degrees nose low and 14" at the front top frame rail and 23.5" tall at the top or the rear frame rail. I expect to leave the patina painted body alone with only a few rework areas as necessary. I'm looking at a big block 396 or 454 as it's going to be a throw back to the 50's hot rod. I like the Detroit Steel Wheels - 18" f and 20" R.

09-29-2021, 01:55 PM	#1
Two Stall Registered User Join Date: May 2014 Location: Hudsonville, MI Posts: 9	My 67 C10 Step Side project (long time comin) I'm new to this blog site and I'm building a 1967 Chevy C10 Step Side. I just working on the frame now with the typical upgrades. I'm boxing in the frame, adding new CPP trans. and rear trailing arm crossmembers and Helix Mustang II IFS. I am looking for a proper Rack and pinion system now and building my own trailing arms with the help of a friend of mine who is a professional welder. The frame stance is 4 degrees nose low and 14" at the front top frame rail and 23.5" tall at the top or the rear frame rail. I expect to leave the patina painted body alone with only a few rework areas as necessary. I'm looking at a big block 396 or 454 as it's going to be a throw back to the 50's hot rod. I like the Detroit Steel Wheels - 18" f and 20" R. Attached Images Last edited by Two Stall; 10-04-2021 at 09:35 AM.