The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**geunther** · 10-01-2021, 06:10 PM

The frame mounted shift pivot is different for BB with TH400 vs SB with Th400. Not to say that the one you are using won't work, but I don't know so just be aware.

The holes should be in place for the crossmember but I believe you will need to move it back as the mounting face of the BB for the trans moves back (as already mentioned). There are several sets of holes for BB/TH400, SB/TH400, SB/TH350. I just went through all the measuring a week or so ago.

The one thing I have not checked on is the parking brake cable brackets. I have seen one pic where there were brackets holding the cable on the rear of the crossmember. I am still checking on that.

10-01-2021, 06:10 PM	#6
geunther Senior Member Join Date: Apr 2005 Location: Cheyenne, WY Posts: 740	Re: 402 in my 68 Golden ? The frame mounted shift pivot is different for BB with TH400 vs SB with Th400. Not to say that the one you are using won't work, but I don't know so just be aware. The holes should be in place for the crossmember but I believe you will need to move it back as the mounting face of the BB for the trans moves back (as already mentioned). There are several sets of holes for BB/TH400, SB/TH400, SB/TH350. I just went through all the measuring a week or so ago. The one thing I have not checked on is the parking brake cable brackets. I have seen one pic where there were brackets holding the cable on the rear of the crossmember. I am still checking on that.