The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Dead Parrot · 10-05-2021, 05:34 PM

If you decide to replace the turn switch, you can reposition the lock plate and fix the steering wheel issue. Mark where it is now and adjust a spline or two when putting it back on. That should adjust the plastic tube and let you adjust the steering wheel the same amount.

Mine was perfect until I replaced the turn switch. I skipped the marking step and when reinstalling, I had to guess and the steering wheel wound up about 20 degrees off.

10-05-2021, 05:34 PM	#8
Dead Parrot Registered User Join Date: Aug 2012 Location: Oklahoma City, OK Posts: 2,675	Re: steering wheel adjustment If you decide to replace the turn switch, you can reposition the lock plate and fix the steering wheel issue. Mark where it is now and adjust a spline or two when putting it back on. That should adjust the plastic tube and let you adjust the steering wheel the same amount. Mine was perfect until I replaced the turn switch. I skipped the marking step and when reinstalling, I had to guess and the steering wheel wound up about 20 degrees off.