The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Ironhorse** · 10-13-2021, 06:20 PM

PRICE REDUCED

Have a pair of solid steel chromed mirror elbows. Arms measure 7 1/2'' on long end and 5 1/2'' on the short end. These were in a box or mirror parts I got some time back. The studs must have rusted and broken off since all studs are gone. Both arms have been marked and center punched ready to drill for threaded bolts. One arm end has been started to be drilled for a threaded bolt. I don't have a floor drill press and since don't need these for my truck they're offered here. Can be used with a bolt for mirror mounting or if you have the correct acorn nuts use an all thread rod epoxied in and then the acorn cap. Set to go with no more rust thru on your mirror arms. $20 shipped for the pair, money order or $$, do not have Paypal.

10-13-2021, 06:20 PM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,339	Pair Solid Mirror Elbows PRICE REDUCED Have a pair of solid steel chromed mirror elbows. Arms measure 7 1/2'' on long end and 5 1/2'' on the short end. These were in a box or mirror parts I got some time back. The studs must have rusted and broken off since all studs are gone. Both arms have been marked and center punched ready to drill for threaded bolts. One arm end has been started to be drilled for a threaded bolt. I don't have a floor drill press and since don't need these for my truck they're offered here. Can be used with a bolt for mirror mounting or if you have the correct acorn nuts use an all thread rod epoxied in and then the acorn cap. Set to go with no more rust thru on your mirror arms. $20 shipped for the pair, money order or $$, do not have Paypal. Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks Last edited by Ironhorse; 10-21-2021 at 07:43 AM. Reason: Price Reduced