The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Stroker · 07-20-2004, 05:00 PM

With a 6 inch drop you'll need to relocate the shock mount and install shocks for the lowered stance. You'll aslo need an adjustable panhard bar or kit of some type. You can get by without a frame notch but you'll probably need to shave down the rear bump stops to give the rear end a little extra travel. I've never used the progressive type aftermarket bump stops but they might be the best way to go if you have problems with bottoming out.

07-20-2004, 05:00 PM	#4
Stroker Registered User Join Date: Mar 2001 Location: Moore, Ok Posts: 1,149	With a 6 inch drop you'll need to relocate the shock mount and install shocks for the lowered stance. You'll aslo need an adjustable panhard bar or kit of some type. You can get by without a frame notch but you'll probably need to shave down the rear bump stops to give the rear end a little extra travel. I've never used the progressive type aftermarket bump stops but they might be the best way to go if you have problems with bottoming out. __________________ 72 SWB parts and pieces Oklahoma Last edited by Stroker; 07-20-2004 at 05:04 PM.