Quote:
Originally Posted by 67carry-all
As for 12V to the HEI, yes, doing that, but a little differently than most of the ways I've read. I have the original resistor wire going to a relay, triggering a full 12-14 volt feed with the key on.
|
At the firewall connector, you can squeeze the male terminal that feeds the resistor wire and push it out the back of the connector. Then insert a fresh Packard 56 male terminal with regular wire attached and power the HEI that way.
I recommend it, it's fewer components which means less to fail. Full thread here:
https://67-72chevytrucks.com/vboard/...d.php?t=708975