View Single Post
Old 10-28-2021, 10:28 AM   #16
biketopia
Senior Member
 
Join Date: Jul 2015
Location: Warrenton VA
Posts: 1,119
Re: Blazer Tank for EFI - LS3 Setup ????

Quote:
Originally Posted by cj847 View Post
Have checked out Tanks Inc website. I have found their prices competitive.

I wonder why you want a return less system. It is easy to use a return system by putting a 99 Corvette filter/regulator near the tank. The filter has a built in regulator and return.
This. This is quite easy to do, the filter is readily available at all your parts stores for low money too. Then you only need a short run of return hose. Speedway sells a complete set up for doing exactly this, or you can piece it together with parts store items pretty easily. And you should be fine with -6 feed line, half inch would be over kill i feel, especially for an N/A application.
__________________
71 c-10 Long Bed, under the knife for a No Limit Engineering Wide Ride Chassis Pack and coil over static drop.

07 Silverado Classic 2wd

95 Camaro 427SBC/TH350
biketopia is offline   Reply With Quote