|
Re: Removing Bed
I literally just bolted the bed back onto my 62 today. When i took it off i was able to move the bed around with the rotted wood by myself. Not saying i am he-man or anything but was able to with the long bed.
After i put the new wood in, that was a different story. It was significantly heavier. I used an engine hoist and used the cross sills as my lift points. Long story short, I believe you will be fine lifting from the cross sills if i was able to with new oak when putting it back on.
Useful tip…. Take your wheels off and drop that sucker down as low as you can. Don’t have to lift it as high to get over the wheels.
I attached a picture if it comes through on how i strapped it.
|