The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - DIY window Regulator and OEM Style Switch

Peanut74 · 01-11-2022, 10:13 PM

First off credit goes where credit is due. bonnieclyde100 thread on cheap power regulators is my inspiration for my design. Below is the address to his thread:

http://67-72chevytrucks.com/vboard/s...d.php?t=601167

Ok, now on to my design. I wanted to have OEM style window switch to fit the theme of my truck. I will be doing an option 2 as when I took the passenger regulator apart the spring shot parts everywhere. Lost the regulator gear portion of the crank so I will be coming back with an option 2 for the switch. (I'm sure I will find the gear after I get done with option 2 design. LOL)

01-11-2022, 10:13 PM	#1
Peanut74 Registered User Join Date: May 2018 Location: Prattville, AL Posts: 611	DIY window Regulator and OEM Style Switch First off credit goes where credit is due. bonnieclyde100 thread on cheap power regulators is my inspiration for my design. Below is the address to his thread: http://67-72chevytrucks.com/vboard/s...d.php?t=601167 Ok, now on to my design. I wanted to have OEM style window switch to fit the theme of my truck. I will be doing an option 2 as when I took the passenger regulator apart the spring shot parts everywhere. Lost the regulator gear portion of the crank so I will be coming back with an option 2 for the switch. (I'm sure I will find the gear after I get done with option 2 design. LOL) Attached Images __________________ -------------------------------------------------------- 1967 C10 "Snowball" (Currently in a thousand pieces down from a bazillion) 1989 Toyota DLX pickup "The Hulk"