The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**sfont66** · 01-13-2022, 07:27 PM

Not sure if you now have the info you need, I thought I would add a pic of the parts I removed from my 72 c10. These are off a 72 C10 with a 350 and a Sm465 4 speed transmission.
You can see the bracket that was removed from the frame, the z bar, the pivot that bolts to the engine block, as well as the upper and lower push rods.
I am not familiar with the 6 cylinder parts, or if they are the same , but maybe this info will help

01-13-2022, 07:27 PM	#12
sfont66 Senior Member Join Date: Nov 2015 Location: Pine City MN Posts: 388	Re: Auto to manual question Not sure if you now have the info you need, I thought I would add a pic of the parts I removed from my 72 c10. These are off a 72 C10 with a 350 and a Sm465 4 speed transmission. You can see the bracket that was removed from the frame, the z bar, the pivot that bolts to the engine block, as well as the upper and lower push rods. I am not familiar with the 6 cylinder parts, or if they are the same , but maybe this info will help Attached Images __________________ 72 C10, Was a 350,M20, Brodix heads,Comp cam, Edelbrock intake&carb, Hedman hedders LWB. Project is now a 5.3(L33) w/PRC stage 2.5 CNC ported 243heads, FAST 102/102, FIC injectors,BTR RedHot cam,Holley Terminator X, T56 magnum. SWB, Boyd tank. 4.5/4 Drop http://67-72chevytrucks.com/vboard/s...My72c10project