The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**hooverfish** · 01-14-2022, 03:31 PM

Hello Mark,
On my seats I used 73-76 bench seat brackets for the Driver side. Had to add two pieces from the Chop-Shop to bolt them in place, circled in blue below.
Also used 4 chop shop brackets on Passenger seat.
Then two C-S brackets that are welded to the floor. Circled in red
Brackets circled in yellow are the two for the Driver seat in pic #1.
And yes, brackets at the rear of the seat bolt directly to the seat.

Hope this answers your question.

01-14-2022, 03:31 PM	#52
hooverfish Senior Member Join Date: Oct 2012 Location: Lexington, Ky Posts: 2,176	Re: BUCKET SEATS in a 1984 ?? Hello Mark, On my seats I used 73-76 bench seat brackets for the Driver side. Had to add two pieces from the Chop-Shop to bolt them in place, circled in blue below. Also used 4 chop shop brackets on Passenger seat. Then two C-S brackets that are welded to the floor. Circled in red Brackets circled in yellow are the two for the Driver seat in pic #1. And yes, brackets at the rear of the seat bolt directly to the seat. Hope this answers your question. Attached Images __________________ Larry 84 Chevy SWB, "Roy", dark blue OG paint, 5.7 LS1, 4L60, Vintage Air, 96k miles. "It's a sorry man who can't find his wife a good job" Last edited by hooverfish; 01-14-2022 at 03:37 PM.