|
Re: New 68 Stepper Build...IM BACK!!
Quote:
Originally Posted by 77chris03
Just got off the phone with Georgia from tanks inc. Here is what she said almost word for word.
The tank was designed to be installed to the bottom side of the frame. There are no straps or additional support required as the flange was designed to hold the weight of the tank, fuel, and components installed. You can install it in between the frame rails or even on top but it was designed to be hung from the bottom side of the frame rail with 2 bolts on each side.
She said to use 3/8 or larger to secure the tank
|
That's good enough then. They built the tank flange to support the components. Basically it's overbuilt vs an OE tank.
What tank p/n BTW?
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|