The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

LS short box · 02-03-2022, 05:37 PM

The inside of the spoke just barely touched the raised Corvette logo on the face of the calipers.
I got the hubs/bearings and C5 brackets from Custom Works. I don't know about them being turned down gen 3 rotors.
I've also used the same kit from Tobin at Kore3. His hubs are machined aluminum but are about $100 more money.

02-03-2022, 05:37 PM	#67
LS short box Registered User Join Date: Jun 2015 Location: Carlos MN Posts: 1,963	Re: New 1980 Camaro project. The inside of the spoke just barely touched the raised Corvette logo on the face of the calipers. I got the hubs/bearings and C5 brackets from Custom Works. I don't know about them being turned down gen 3 rotors. I've also used the same kit from Tobin at Kore3. His hubs are machined aluminum but are about $100 more money.