Re: New parts stiffie
Hey guys, The box is a "new" cardone reman for a 77 C10. The truck had one in it when i bought it but it was sloppy and leaked. The numbers that were on the box indicated that was what year it was so i just went with that and along with the pitman arm for the same year. The idler is for my year truck a 67. The pump is a year old.
The procedure I did was top off fluid and turn the wheel lock to lock slowly with the engine running and topping off fluid as I went. I did this about 10-15 time the first time then had my son turn the wheel while I looked underneath to see if anything was binding this was an additional 5-8 more times. I did use the box as is out of the box. I didn't know that there was anything I was to adjust. I'll read the attached thread
|