Quote:
Originally Posted by mkmc69
So where do you purchase a carpet that is for a high hump with the gas tank removed? Does that even exist?
|
It does exist, and in the past I have been able to recommend ACC without reservation, but recently I was disappointed. I have ordered the ACC carpet through Rockauto in the past and have been very happy with it. In December I ordered carpet, and it fit well, but was short by 6”. They figured out the box was mislabeled so I sent it back, and reordered again. This time the carpet was cut poorly around the transmission tunnel, and out of square by the back of the cab.
This carpet was also returned, and again I reordered, finally on the 3rd attempt, I think it will work ok.
1st pic is good fitting carpet ordered in 2020, no issues.
2nd pic shows carpet 6”+ short of back of cab
3rd pic is Poor fitting carpet on top of good fitting carpet,to show problem areas.
4th pic is the same poorly cut/fitting carpet in the cab
5th pic is final carpet that will work ok…. Normally I would lay it in the sun for a while to help relax the wrinkles , but I needed to check the fit.
In the end, Rockauto and ACC made it right, just took a while.
ACC part# 17905-232
__________________
72 C10, Was a 350,M20, Brodix heads,Comp cam, Edelbrock intake&carb, Hedman hedders LWB.
Project is now a 5.3(L33) w/PRC stage 2.5 CNC ported 243heads, FAST 102/102, FIC injectors,BTR RedHot cam,Holley Terminator X, T56 magnum. SWB, Boyd tank. 4.5/4 Drop
http://67-72chevytrucks.com/vboard/s...My72c10project