The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Parasitic amp draw after doing the jumper at the regulator

trijetal · 03-22-2022, 09:23 PM

That's what I was doing when I found the problem. I don't know if the regulator is correct or not actually. I don't see any ID marks, but it has a white (#1) and a blue wire plugged in and red and black on the case. It looks like others I have seen on youtube. The videos show the jumper wires 1 to 4 and 2 to 3, not like the schematic. Is the 12 SI the model number I should be using? This one looks like it but looks can be deceiving.

03-22-2022, 09:23 PM	#5
trijetal Registered User Join Date: Mar 2022 Location: YUMA, AZ Posts: 11	Re: Parasitic amp draw after doing the jumper at the regulator That's what I was doing when I found the problem. I don't know if the regulator is correct or not actually. I don't see any ID marks, but it has a white (#1) and a blue wire plugged in and red and black on the case. It looks like others I have seen on youtube. The videos show the jumper wires 1 to 4 and 2 to 3, not like the schematic. Is the 12 SI the model number I should be using? This one looks like it but looks can be deceiving.