The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**mongocanfly** · 03-27-2022, 07:37 PM

Been getting my 5min here and there..and had to order a couple of 30deg bends to do the 2nd offset behind the transfer case...they sat at fedx in oregon for over 2 wks before they shipped them ..
so I've been getting exhausted working on my tailpipes..got the pass side snaked thru the hole by the tcase... should have done this side 1st..the drivers side would have been much easier to match it..trying to match the straight side with a bunch of offset compound angles ain't easy..
So ive got it back to the mufflers now..

03-27-2022, 07:37 PM	#1609
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,701	Re: Columbus..the 1957 IH 4x4.. Been getting my 5min here and there..and had to order a couple of 30deg bends to do the 2nd offset behind the transfer case...they sat at fedx in oregon for over 2 wks before they shipped them .. so I've been getting exhausted working on my tailpipes..got the pass side snaked thru the hole by the tcase... should have done this side 1st..the drivers side would have been much easier to match it..trying to match the straight side with a bunch of offset compound angles ain't easy.. So ive got it back to the mufflers now.. Attached Images __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver Last edited by mongocanfly; 03-27-2022 at 07:48 PM.