The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Disc swap

**kwmech** · 03-28-2022, 12:33 PM

When I did my conversion in my dually I kept the lines in the back. It was easier than going behind the frame rail, shortening and reflaring the line for the front. The bolt issue is you have a 7/16 bolt in your hand and have 10mm hole in the line. What thread is the caliper?

03-28-2022, 12:33 PM	#4
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,718	Re: Disc swap - Soft hoses to front or leave in back? When I did my conversion in my dually I kept the lines in the back. It was easier than going behind the frame rail, shortening and reflaring the line for the front. The bolt issue is you have a 7/16 bolt in your hand and have 10mm hole in the line. What thread is the caliper? Last edited by kwmech; 03-28-2022 at 12:44 PM.