View Single Post
Old 03-30-2022, 01:47 PM   #7
bry593
Registered User
 
Join Date: May 2016
Location: Oklahoma
Posts: 201
Re: Sloppy shift linkage at the transmission

Yes, that piece is hardened 1045ish steel.

Yes, you can weld it and grind for clearance. However, that piece is not worn (GM hardened). It is no more a problem now than when the truck was new. Most likely, bushings and such in the rest of the linkage are the issue.
__________________
1971 C20 Custom Deluxe, HT383, 4L80E, 3.73 Locker, 4 Wheel Discs
bry593 is offline   Reply With Quote