View Single Post
Old 04-04-2022, 03:56 PM   #3
HotWheelsFan
Registered User
 
HotWheelsFan's Avatar
 
Join Date: Mar 2010
Location: Oregon
Posts: 190
Re: Points Ignition wiring

That connection might be at the coil or at the starter terminal, it should be two wires at either terminal if I remember correctly. What that does is: when the starter engages it will supply 12v to the coil for a hotter spark while cranking. The 12v power to the coil comes from the starter during cranking only. With the key in the run position you no longer get the 12v power connection from the starter however, the wire will be energized within the circuit as it should be energized by the resistance wire to the coil.

Hope this helps a bit.

Bob
HotWheelsFan is offline   Reply With Quote