|
Re: Flip kit ended up too low. How do I gain some height back?
Quote:
Originally Posted by LT7A
I've been watching this discussion with interest since I will likely end up with the same issue. I'm not "get it as low as possible" type of guy, but want a little less elevation with good driveability and a decent look. I also like the idea of the axle flip since I think spring under axle is inherently a little more stable. So I intend to use 4x hangers, and lift shackles if necessary, to bring it back up a little. I really don't want to install an additional on-board system. I'll be really interested to see that works. The nice thing is you can dial it in exactly where you want it.
|
How many leafs in your spring pack?
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|