The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Ironhorse** · 05-01-2022, 05:15 PM

Fits the lugs on the '70 3/4 ton I am slowly parting out. 18'' length to the straight section, angled section is 5'' in length. These measurements are from tip to center of bend from either direction. Tapered tip is good with no pry damage or curled metal. Has the cast letter " O " at the belled lug opening. $25 plus shipping, money order, do not have Paypal.

05-01-2022, 05:15 PM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,360	13/16'' Lug Wrench Fits the lugs on the '70 3/4 ton I am slowly parting out. 18'' length to the straight section, angled section is 5'' in length. These measurements are from tip to center of bend from either direction. Tapered tip is good with no pry damage or curled metal. Has the cast letter " O " at the belled lug opening. $25 plus shipping, money order, do not have Paypal. Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks