|
Re: Fashionable Fever! - 1969 Chevy C10 Build
While I was waiting on the welds to cool on the passenger kick panel vent, I was looking at where the cowl/cab meets the firewall. The metal has a 90* bend and meets the firewall and is spot welded together. There is multiple spots along this joint that is pretty rusted out.
The only thing I can think of is to cut this metal out and put new in after cleaning the rust out.
Anyone ever done this? I have a feeling once I cut out the 90* bend, the firewall metal will be so bad, I'll have to cut all that out as well. I see a couple holes all the way through the firewall into the cab on the drivers side roughly above the fuse block.
|