|
Re: A '62 has to get back on the road
Slowly I can do something again, nobody needs Covid19. Inside I'm almost done, the Bench seat still has to go in. I had to install a safety switch so that the engine only starts in "P", the original one collided with the firewall, so nobody was there.
I used a small industrial roller switch and put it on the shift lever
Are there actually longer speedometer cables? I find it a little tight with the TH350
Stabilizer is also attached.
Shift linkage installed.
Rough preset toe, camber and caster.
Now the inner fenders could be mounted.
Fenders attached, whether the alignment is okay.
|