The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**bhap** · 06-19-2022, 10:31 AM

The end of the shaft with the splines should be flush with the inside edge of the u-joint housing. You may need to turn the coupling a little and drill a new set screw nub.

06-19-2022, 10:31 AM	#11
bhap Senior Member Join Date: Mar 2006 Location: Pittsburgh, PA Posts: 277	Re: Steering U Joiint The end of the shaft with the splines should be flush with the inside edge of the u-joint housing. You may need to turn the coupling a little and drill a new set screw nub.