The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Billy G · 08-01-2004, 02:24 PM

Question....Im in the process of a disc brake swap. Have all parts from a 76 I think....spindles, rotors, calipers, tie rods, centerlink,ect. My question is...If I use the brake proportioning block off the 76, where is the best place to mount it? My plans are to use a new 76 master cylinder...the brake tubings as they are mounted on the 76, as well as locate the block on the crossmember frame brace as the 76 is mounted. Will this WORK???? I'd appreciate any and all ideas.

Thanks..

Billy G

08-01-2004, 02:24 PM	#1
Billy G Registered User Join Date: May 2003 Location: Dayton, Tx (in Old River) Posts: 286	Disc Brakes Question....Im in the process of a disc brake swap. Have all parts from a 76 I think....spindles, rotors, calipers, tie rods, centerlink,ect. My question is...If I use the brake proportioning block off the 76, where is the best place to mount it? My plans are to use a new 76 master cylinder...the brake tubings as they are mounted on the 76, as well as locate the block on the crossmember frame brace as the 76 is mounted. Will this WORK???? I'd appreciate any and all ideas. Thanks.. Billy G __________________ My FAMOUS LAST WORDS...."Ima Gonna!!" - 1970 GMC 1500 swb/step 250 I-6 3 spd - "The GEM" - 1976 Chev Scotsdale swb/step 350/350 - "The JEWEL" - 1982 Chev C-10 swb/step 250 I-6 3 spd - - 2001 Chev Silverado LT -