Re: NOT so EZ wiring
worked a little on the wiring some more. after the wiper switch i went at the cig lighter. tied my ez wire cig wire (gray) to the red wire. this cig lighter is from lmc truck. the red wire goes to the middle prong on lighter, wired to the gray ez wire. the blue wire is a light that will get spliced to the brown ez wire for cluster lights. i will run a ground to it as well, although i think the housing grounds itself the dash. better safe than sorry
also got the brake switch wired up, minus the 12 volt key wire. im going make a ground distribution block and a 12 volt key distribution block and mount them on the firewall somewhere, inside the truck. i think a wire from the "ACC" on the fuse block will give the distribution block its feed. that way i have options in the future for tapping into 12 volt key sources.
will move on to the NSS when i my column gets back from the rebuild.
__________________
67 1/2 ton Suburban - Project DRGNWGN. Build thread
-_--_--_ _________
_--_-_ -/____|__|__\__
,.,,,.,.,,.,|_O _______ O_]
|