The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**kev2809** · 07-05-2022, 11:03 AM

ok. so your saying run a wire from the "ACC" fuse location, to a relay, then to a distribution block?

"ACC" wire to pin 30, pin 87 to 12 volt distribution block, pin 85 to ground distribution block, unsure on pin 86 since thats usually where a switch gets wired... correct?

also wanted me to make sure the "ACC" fuse location is a 12 volt key.

i have other wires throughout the dash that wont be used - power windows, power locks, power antennae (also have heat and ac, but will keep those just in case for future). but i think i will wrap those up and tuck them in the dash.

07-05-2022, 11:03 AM	#31
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,142	Re: NOT so EZ wiring ok. so your saying run a wire from the "ACC" fuse location, to a relay, then to a distribution block? "ACC" wire to pin 30, pin 87 to 12 volt distribution block, pin 85 to ground distribution block, unsure on pin 86 since thats usually where a switch gets wired... correct? also wanted me to make sure the "ACC" fuse location is a 12 volt key. i have other wires throughout the dash that wont be used - power windows, power locks, power antennae (also have heat and ac, but will keep those just in case for future). but i think i will wrap those up and tuck them in the dash. Attached Images __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]