The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Senor_paco · 08-02-2004, 12:34 AM

I have a DJM/Belltech drop of 2" in front, and 4" in the rear by menas of shackles, hangers, and want 1" more on the back. I'm gonna get spindles for the front to drop it 2" more, and want 1" on the back. Can I get 3" hangers? Replacing the shackles were a *****, took me almost 2 days with a air chisel/drill, big ass hammer to get the oem out, so don't wanna screw with that.
Any advice is appreciated.

08-02-2004, 12:34 AM	#1
Senor_paco Registered User Join Date: Mar 2003 Location: San Antonio, TX Posts: 441	Need 1" more drop, asking for advice I have a DJM/Belltech drop of 2" in front, and 4" in the rear by menas of shackles, hangers, and want 1" more on the back. I'm gonna get spindles for the front to drop it 2" more, and want 1" on the back. Can I get 3" hangers? Replacing the shackles were a *****, took me almost 2 days with a air chisel/drill, big ass hammer to get the oem out, so don't wanna screw with that. Any advice is appreciated.