The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**kev2809** · 07-16-2022, 09:14 PM

before I get on that relay, I had a quick question on the neutral safety switch. I understand the purple sol. wire gets interrupted by the switch. the kit comes with a separate purple wire labeled "neutral safety switch". so I cut the sol wire and plugged it into the switch, and I soldered the the separate nss wire to the cut sol. wire fro. the ign switch, and that plugged into the other terminal on that switch.

my question is how does the reverse wire get split? it's one green wire labeled "backup power". Im assuming this goes the other plug for the nss on the column...the v shaped one. do I just plug it to either side of the plug, and leave the other empty?

07-16-2022, 09:14 PM	#34
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,142	Re: NOT so EZ wiring before I get on that relay, I had a quick question on the neutral safety switch. I understand the purple sol. wire gets interrupted by the switch. the kit comes with a separate purple wire labeled "neutral safety switch". so I cut the sol wire and plugged it into the switch, and I soldered the the separate nss wire to the cut sol. wire fro. the ign switch, and that plugged into the other terminal on that switch. my question is how does the reverse wire get split? it's one green wire labeled "backup power". Im assuming this goes the other plug for the nss on the column...the v shaped one. do I just plug it to either side of the plug, and leave the other empty? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]