View Single Post
Old 10-30-2022, 09:56 AM   #5
Pontiac1976
Registered User
 
Pontiac1976's Avatar
 
Join Date: Oct 2015
Location: Ottawa, Ontario, Canada
Posts: 780
Re: Bleeder Valve 1980 C20

Quote:
But..you can just crimp the rubber brake hose with some vice grips, to prevent all the fluid from draining
I all was thought that help the rubber hoses break down to clapping hoses faster. I did my self, but I stopped started to use (screw bolts combo or plastic plugs anything that fits that does not strip hole needing plugged Because you still should bleed the brakes any time you open any line or fitting or big adjustment to the brakes.
__________________
1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed
Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.
Pontiac1976 is offline   Reply With Quote