|
Re: Headlight relay
Install is very simple. No cutting any wires. Just mount the relays where I did or on PS of core support if you want. Simple install steps come with harness
Mount relays (I drilled 2 holes in fender lip)
connect harness + wire to the + buss on PS fender by battery
screw ground wire to fender
unplug PS headlight and plug it into harness (marked plug)
plug the harness plug into PS headlight
run harness under core support to DS
Unplug DS headlight (it will be left unused)
plug harness plug into DS headlight
Open beer, admire work
I have one of these in my 67 Camaro also (different brand). All the older cars had full headlight draw go through the switch, so this mod is beneficial to any car/truck of that era
|