The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

f.monroe · 11-15-2022, 01:26 AM

I have a 6.0 and a 4L80 in mine. Texas speed recommended their 224r on a 114 LSA. It has a mild lope and it doesn't push through the factory torq converter at all. It actually idles pretty well with the stock converter since 4L80 has a little more stall than the 4L60. The 114 LSA gives up a little low end with my 3.40 gear and a 30 inch rear tire. It gets wound up and pulls pretty hard after about 3000 rpm though. I think I will switch to 4.10 rear gear soon because id like more low end. Once I do that I may swap to a more aggressive cam with a split duration and lower LSA just for the sound and to bring the torque in sooner.
Frank

11-15-2022, 01:26 AM	#9
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: Cam for 6.0 LS ? I have a 6.0 and a 4L80 in mine. Texas speed recommended their 224r on a 114 LSA. It has a mild lope and it doesn't push through the factory torq converter at all. It actually idles pretty well with the stock converter since 4L80 has a little more stall than the 4L60. The 114 LSA gives up a little low end with my 3.40 gear and a 30 inch rear tire. It gets wound up and pulls pretty hard after about 3000 rpm though. I think I will switch to 4.10 rear gear soon because id like more low end. Once I do that I may swap to a more aggressive cam with a split duration and lower LSA just for the sound and to bring the torque in sooner. Frank __________________ Born and proudly residing in a Red State !