The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

skid · 08-08-2004, 02:35 PM

Actually it is pretty easy to make a plunger rod. You just need to measure how far it needs to stick out past the m/c mount. A long 3/8 bolt could be used for a plunger rod, just cut off the hex, and round of the m/c side on a grinder. I mounted mine in a drill and spun it as I ground it. This made it perfectly round.

08-08-2004, 02:35 PM	#16
skid Registered User Join Date: Dec 2003 Location: Left Coast Posts: 254	Actually it is pretty easy to make a plunger rod. You just need to measure how far it needs to stick out past the m/c mount. A long 3/8 bolt could be used for a plunger rod, just cut off the hex, and round of the m/c side on a grinder. I mounted mine in a drill and spun it as I ground it. This made it perfectly round. __________________ Toys: 72 K5 Blazer 74 Vette Last edited by skid; 08-08-2004 at 02:43 PM.